Using The Accessories - Electrolux COB400W User Manual

How to cancel: Clock functions
Step 1
- press repeatedly until the clock function symbol starts to flash.
Step 2
Press and hold:
The clock function turns off after few seconds.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Using the core temperature
sensor
The core temperature sensor measures the
core temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the table
for roasting.
• The core temperature. Refer to the table
for the core temperature sensor.
CAUTION!
Only use the core temperature sensor
supplied with the appliance, or genuine
replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
The indicator for the core temperature sensor
flashes.
2. Put the point of the core temperature
sensor into the centre of the meat.
34 ENGLISH
.
3. Press the button
temperature. You can set the temperature
from 30 °C to 99 °C.
4. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes. Press a button to stop the
signal.
5. Deactivate the appliance.
6. Remove the plug of the core temperature
sensor from the socket. Remove the meat
from the appliance.
If the meat is not cooked to your satisfaction,
do the above steps again and set a higher
core temperature.
You can change the temperature at any time
during the cooking. Press
set core temperature.
WARNING!
Be careful when you remove the tip and
plug of the core temperature sensor. The
core temperature sensor is hot. There is
a risk of burns.
9.2 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping of the shelf.
or to set the core
to change the