LG SH5B Owner's Manual page 27

3. When this unit is successfully connected with
your Bluetooth device,
"PAIRED" Your device's name "BT" appears on
display wndow in order.
,
Note
y If it is unavailable to display device name on
the unit, "_" will be displayed.
y To check the connected device's name,
press and hold REPEAT on the remote. The
connected Bluetooth device is displayed..
4. Listen to music.
To play a music file stored on your Bluetooth
device, refer to your Bluetooth device' s user
guide.
,
Note
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However it may not work well in the cases
below :
- There is a obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
y You should connect your Bluetooth device to
this unit again when you restart it.
,
Note
y The sound may be interrupted when the
connection has interference by the other
electronic waves.
y Pairing is limited to one Bluetooth device per
unit and multi-pairing is not supported.
y Depending on the type of the device, you may
not be able to use the Bluetooth function.
y You can enjoy Bluetooth function using
phone, MP3, Notebook, etc..
y The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
y When Bluetooth connection is disconnected,
connect the bluetooth device to the unit
again.
y When the unit is not connected, Bluetooth
"READY" appears on the display window.
y When you connect a Bluetooth device
(iOS device etc.) to this unit or operate the
device, the volume level can be synchronized
between the two devices.
y You can control a Bluetooth device using
C/V (Skip) and dM (Play/Pause)
buttons on the remote control.
Operating 27
3