Sony SLV-675HF Operating Instructions Manual page 9

|
Hookup 1 Pages 9 and 10
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV). _
©
Use this hookup if you're using: 2
¢ VHF/UHF antenna (you get channels 2-13 and channels 14 and higher) B
¢ UHF-only antenna (you get channels 14 and higher) 2
¢ Separate VHF and UHF antennas a
a
Rear of TV
VHF/UHF
gocencceneen po] A Match the type of
. connector on your
VHF TV: A, B, or C.
--—»f L2E=f] 8
'
eee eee eee
UHF
or
VHF
C
ure
UHF
[El Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF Match the type of
Sommieaeeese po] A connector on your
' TV: A, B, or C.
VHF
B For connector types
UHE B and G no UHF
connection is
required.
vHE 4
c
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 41.
Getting Started | 9