Sony SLV-675HF Operating Instructions Manual page 39

Operation
(when recording on this VCR)
Before you start editing
¢ Turn on your TV and set it to the
video channel. =
¢ Press INPUT SELECT on the remote
commander to display "L" in the
display window.
¢ Press TAPE SPEED on the remote
commander to select the tape speed,
SP or EP.
1
3
4
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press If PAUSE.
Press @ REC on this VCR and set it to recording pause.
To start editing, press the If' PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the Hl STOP buttons on both VCRs.
Note
If you start recording following the procedure above, the VCR won't start recording
with the APC function. To record a tape with the APC function, press @ REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press If PAUSE immediately after the APC indicator stops
flashing. If you press If PAUSE before the APC indicator stops flashing, the APC
function is canceled. .
Additional Operations
39