Sony SLV-675HF Operating Instructions Manual page 41

Hide thumbs Also See for SLV-675HF:
Table of Contents

Advertisement

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use the EAC-32
antenna connector (not supplied) to —
connect the antenna to the VCR.
300-ohm twin
lead cable
EAC-32 Antenna
connector (not
supplied)
1
Loosen the screws on the antenna connector.
2
Wind the twin leads around the screws on the antenna connector.
3
Retighten the screws.
Attaching a UHF/VHF band
300-ohm twin
mixer
lead cable
When using both 75-ohm coaxial cable
and 300-ohm twin lead cable for VHF/
| EAC-66
UHF antenna, use the EAC-66 UHF/
UHF/VHF
VHF band separator /mixer (not
band
supplied) to connect the antenna to the
separator/
VCR.
mixer (not
supplied)
75-ohm coaxial &
cable
Loosen the screws on the mixer.
:
Wind the-twin leads around the screws on the mixer.
Retighten the screws.
AWN
=
Connect the 75-ohm coaxial cable to the mixer.
Additional information r

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slv-675hf pxSlv-676hf

Table of Contents