Sony SLV-675HF Operating Instructions Manual page 27

To watch another TV program while recording
1° Press TV /VTR to turn off the VTR indicator in the display window.
2 ifthe TV is connected to the VCR's LINE OUT jacks, set the TV to TV
input; if not, skip this step.
3 Select another channel on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on a tape
again, cover the tab hole with adhesive tape.
Safety tab
Tips
* To select a channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
* You can select a video source from the LINE IN jacks using INPUT SELECT.
The display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
¢ If you don't want to watch TV while recording, you can turn off the TV. When using
a cable box, make sure to leave it on.
Notes
¢ The remaining tape length may not be indicated accurately for short tapes such as
T-20 or T-30, or tapes recorded in the LP mode.
¢ The display doesn't appear during still (pause) mode, search mode or slow-motion
playback.
¢ Jt may take up to one minute for the VCR to calculate and display the remaining
tape length after you press DISPLAY.
suogesedg siseg
Basic Operations | 27