Advertisement
Setting the Clock
Set the clock or display time when the radio is turned off.
When you insert the batteries for the first time,
digits flash in the display window. To stop
flashing, press the CLOCK/ENTER button.
= eaa}> (= deal
While pressing the CLOCK/ENTER button, press
the TUNE/TIME
+ or — button to set the clock to
the current time. Each time the button pressed,
the digits move forward or back by one. When you
keep the button pressed, the digits change rapidly.
When you release the CLOCK/ENTER button,
the clock starts operating, and ":" starts
flashing. If you release the CLOCK/ENTER button
simultaneously with the time signal as it sounds, the
clock starts from zero second.
Changing the AM Channel Step
1
Make sure that the radio is turned off.
2
White pressing the CLOCK/ENTER button ©,
keep pressing the POWER button @ for more
than 5 seconds. The AM channel step has been
changed. If you proceed step 2 again, the channel
step changes again.
Note
If you proceed with the step above, the clock and the
preset memory are erased, and "AM 12:00" flashes.
Advertisement
