Table of Contents
Advertisement
Convenient functions
Changing the volume
balance in Dual mode
You can change the volume balance between the two lay-
ered sounds in Dual mode (p. 14).
When the Keyboard is turned on, the response is set to "Stan-
dard."
This setting remains in effect until the HP Piano's power is
turned off.
While holding down the [Demo Song/Key
Touch] button, press the corresponding note
(C7-E7).
Demo Song
Key Touch
Key . Description
C7
Of the two selected tones, the sound assigned to the left
Tone button sounds louder.
C#7
Of the two selected tones, the sound assigned to the left
Tone button sounds somewhat louder.
D7
Standard
D#7
Оғ the two selected tones, the sound assigned to the left
Tone button sounds somewhat quieter.
E7
Of the two selected tones, the sound assigned to the left
Tone button sounds quieter.
МЕМр
|
If you have recorded in Dual mode (p. 14), you can use the
operation above to play back the performance with a
different volume balance between the two layered tones.
Changing the depth of the
Reverb
The depth of the Reverb Effect (p. 16) can be adjusted.
There are eight levels of depth from which to choose.
This is set to "4" when the power is turned on.
Hold down the [Reverb] button and press any
Tone button.
Louder
Reverb
1
3
4
7
2
5
6
8
Рем
Chorus
Pam!
Pam2
Bowi
fams
Тр
мыт
dn
Strings
m
ГГ
БЫ ый lf Hdl ЛГ)
GNE
KM. MM
Hold down...
fL.
...and press one of these buttons
B Checking the depth of the Reverb effect
Press and hold the [Reverb] button.
The Tone button indicators will blink to indicate the
selected depth.
Changing the depth of the
Chorus
The depth of the Chorus effect (p. 17) can be adjusted. There
are eight levels of depth from which to choose.
This is set to "4" when the power is turned on.
Holding down the [Chorus] button, press any
Tone button.
1
2
3
4
5
6
7
8
Deeper
Revers Chorus
Bei Bai Rem
ae
чк
бе
os
> Chorus
С]
Байый
ыйы
ы ыы
m
Hold down...
...and press one of these buttons.
B Checking the depth of the Chorus effect
Press and hold the [Chorus] button.
The Tone button indicators will blink to indicate the
selected depth.
25
Advertisement
Table of Contents
