Table of Contents
Advertisement
Connecting the Product
Inserting/removing the Micro SD card
Recommended Micro SD cards
1. Turn the power off, place the Micro SD card (see the
SanDisk, Transcend
figure below) in the SD card slot, and press it in gently.
2. Press it in once more and the card can be removed.
If Micro SD cards other than the recommended ones are used, it may cause malfunction,
The transfer rate of the Micra SD card may differ according to the PC status.
Insert/remove the Micro SD card while the power is off,
m Do not force the Micro SD card, It may cause malfunction and damage to the
m Micro SD cards cannot be formatted using the product, Use a card reader or
Micro SD card,
Inver plus 4 to format
= Do not detach the Micro SD card when in use. İt may delete data, cause
m When formatting a Micro SD card, all the data are deleted, so back up the
malfunction, or damage the Micro SD card,
Please do not repeatedly insert/remove the Micro SD card.
If the Micro SD card İs not positioned properly, the product may malfunction
or the card may get stuck.
13 Learning the Basic Features
data before formatting,
{fa Micro SD card is not recognized or malfunctions, try to use it again after formatting
Micro SD cards must be purchased separately,
This product recommends that you use a Micro SD card up to 8GB,
Advertisement
Table of Contents
