IRiver S100 Manual page 41

Using iriver plus 4
Initializing the Disc
1. Connect the device to the computer's USB port and
then execute iriver plus 4.
2. Select [Device > Initialize Disc], When the window
pops up asking whether to proceed with initializing
the disc, click [Start].
8. When the initialization process is finished, the
Complete window will be displayed and the device
can be disconnected from the computer.
m File recovery will not be possible if files have been deleted from the device,
Please make sure to perform backup before Initializing the disc
m Using Initializing the Disc, it is possible to initialize external memory (memory cara).
40 Other Information
Upgrading the Firmware
1. Connect the device to the computer's USB port while
connected to the Internet and then execute iriver plus 4.
2. Select [Device > Firmware Upgrade], and the Upgrade
window will be displayed. Complete the firmware
upgrade by following the instruction window.
a |f there is not enough battery, a firmware upgrade may not be initiated.
m Never disconnect the device from the computer while a firmware upgrade file
is being downloaded
m After the download is finished, the upgrade will be initiated when the device is
disconnected from the computer.
m İf the device firmware is the latest version, a pop-up window will be displayed to
indicate that it is the latest version,
= if there is newer firmware version, notification window will be displayed
automatically when the device is connected to the computer.