Sony BRAVIA KDL-26S2000 Operating Instructions Manual page 42

Other Information
No sound/Noisy sound
Good picture, no sound.
Audio noise.
[]
[]
[]
[]
[]
[]
[]
[]
Wide Mode changes automatically.
[]
[]
"Black box" on screen.
Black bands appear at the top and []
bottom of the screen.
Certain programs on DVD or other []
digital sources display a loss of
detail, especially during fast-motion
or dark scenes.
Remote control does not operate. []
[]
[]
[]
Some digital cable channels are not []
being displayed.
[]
Lost password. []
How to reset the TV to factory []
settings.
Check the volume control.
Press MUTING or VOL + so that "Muting"
disappears li'om the screeu
(page 20).
Disconnect your headphones.
Set Speaker to On in the Setup settings (page 34). If it is set to Off, sound is
not output from the TV's speakers regardless ol the TV's volume control.
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
Keep the antenna cable away l_'om other connecting cords.
To avoid TV interference, make sure to use an uudamaged antenna cable.
The current Wide Mode setting is automatically replaced with the 4:3 Default
setting when you change the channel or video input, if 4:8 Default in the Screen
settings is set to other than Off. If you want to lock in the Wide Mode selected
with the WIDE buttou, set 4:3 Default to Off in the Screen settings (page 30).
Check the Auto Wide optiou in the Screen settiugs (page 29).
You have selected a text option in the Setup/Digital Setup setting and no text is
available. (See pages 31 and 39 tu reset Setup selections.) To turn off this Feature,
set fl_e Caption Vision option to Off. If you were trying to select closed
captioning, select CC1 iustead of Text1-4.
Some wide screen programs are fihned in aspect ratios that are greater than 16:9
(tiffs is especially common with theatrical releases). Your TV will show these
programs with hlack bands at the top and bottom of the screen. For more details.
check the documentation that came with your DVD (or contact your program
provider).
The compression used by certain digital broadcasts and DVDs may cause your
TV's screen to display less detail than usual, or cause artit'acts (small blocks or
dots, pixelations) to appear on your screen. This is due to your TV's large screen
and ability to show very line detail, and is normal li_r certain digitally recorded
programs.
Check the polarity of the batteries or replace the hatteries.
Point the remote control at the remote control sensor of the TV.
Florescent lamps can iuterfere with your remote control operation; try turning
off the florescent lamps.
Keep the relnote control sensor area clear l?'oln obstacles.
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company Rn: more iuRn:mation.
The digital cable channel may be set to Hidden in the Show/Hide Channels
setting (see page 38).
Select the Parental Lock settings on the settings screen, then enter the R)llowiug
master password: 4357. The master password clears your previous password and
allows you to enter a new password (page 32).
Turn on the TV. While holding down the tl. button on the remote control, press
the POWER button on the TV. (The TV will turn itself off, then back on again.)
Release tl_e tl. button.
WARNING: The Reset will clear all of your customized settiugs including
Parental Lock setting.
42