Tv Controls - Sony BRAVIA KDL-26S2000 Operating Instructions Manual

Basic Operations
TV Controls
lC OFF/TIMER
[]
MENU Press to display MENU with TV functions and settiugs (see "Overview of MENU" on page
23).
[] %*- Press to cycle through the video inputs. It you set a certain
input to Skip m Label Video
TV/VlDEO Inputs, then the input will not appear.
In the MENU screen, this button serves as confirming the selection or setting.
[] , , Press to adjust the volume.
In the MENU
screen, these buttons serve as left/right buttons.
- VOLUME +
[] I_, ,_ Press to scan through channels. To scan quickly through channels, press and hold down either
- CHANNEL + -/+. In the MENU screen, these buttons serve as up/down buttons.
[] POWER Press to turn on and off the TV.
[]
(IR)
Infrared
Receives IR signals from the remote control.
Receiver/ Senses room light level and adjusts the screen brightness accordingly (see page 33 for details).
Light
Sensor Do not put anything near the sensor, as its flmctiou may be affected.
[]
PIG OFF/
Lights up in green
when the Picture Off feature
is activated. Lights up in orange when the
TIMER LED timer is set. When the timer is set, this LED will remain lit even if the TV is turned oft'. For
details, see page 33.
[] STANDBY LED Lights up in red when your TV is in PC power saving mode. If the LED blinks in red
continuously, this may indicate the display unit needs servicing (see "Contacting Sony" on
page 2).
[] POWER LED Lights up in green when the TV is turned on.
[]
Speaker
Outputs audio signal
22