Selecting The Band - Radio Shack DX-394 Owner's Manual

SELECTING THE BAND
To select the long wave (LW). medium
wave (MW), or short wave (SW) band.
press BAND unti the desired band
appears on the ерау.
Cc rrr
eo ee
Selecting the International Radio
Frequency Band
1, Press METER to display the current
meter band,
2. Press METER agein И you want to
change the meter band. Tne meter
band flashes tor 10 seconds.
з. Whio the moter bund flashes, press the
desired meter band key. For examp, to
soloct the 90 mutar bad. press tom.
SETTING A LIMIT TUNING
RANGE
You can set a frequency range во you can
tune to frequencies between lowor and
upper limita,
1. Proce LIMIT. LIMIT appears on tho
display
2. Press POM. A flashes for about 10
seconde
+ To sel 150 kHz, enter 150.
® To set 1 MHz, enter 1000 or 1.
+ you try to enter invalid frequency
(100, for example), Error appears
on the display. Press CLEAR or wait
5 seconds urtil Error disappears
from the display.
+ You cannot use the main tuning knob
to кө! a imit tuning range:
4. Press LIMIT, Y flashes for about 10
6. Pross ENT.
7. Press A or ¥ to search through the
frequencies in the selectod band.
Notes:
15