A Look At The Display - Radio Shack DX-394 Owner's Manual

‫س‬
A LOOK AT THE DISPLAY
. — enters a decimal point when you
amor a frequency.
ENT — stores a frequency in a channel.
The display has several indicators hat show the receiver's current operating mode. A quick
look atthe display will help you uncerstanc how to operate your receiver.
Ez: (2: dB: Па
иитиитин
pears when you sot a 30- oF 69-
timer
TIMER ON OFF — tho number from 1 to
Sundor this incicator shows the timer con-
оп and which timar is active.
SIGNAL STRENGTH meter — indicates
signal strength
LIMIT appears when the receiver is in
the limit frequency mode,
LM MW, and SW — shows the band the
receiver is currently tuned to: long wave
(DW). medium wave (МУЛ), or short wave
(Бе)
А or Y— appoare when you set a limit
frequency range or press А or V.
sov ci EL] йз
Frequency indicator — indicator your
tuned frequency — from 150 Мт to
29.9999 MHz.
m — uopears when а band meter is
selected or a frequency is set.
PGM — tho number to the right of this
indicator shows t h e programmed channel
голо.
ив — appears when noise banker is
active.
MON — appears when the receiver is
tuned to a monitor memory.
STEP (kHz) — appears with digits to
shew which frequency step ( 0 . 1 , 1, 5, 9, or
10) the recsivor is set to.
ESI appears when you tum on the
lock function
эз