Maintenance; Technical Data; Recycling And Disposal - GARANT VL1 Instructions For Use Manual

7. Maintenance

Interval
Before each use
After each time the pressure
sprayer is used
Once a year
8. Faults
Fault
Maximum pressure not
achieved.
Uneven spray pattern
Container hard to open

9. Technical data

Size
Capacity
Maximum operating pressure
Material of seal
Spray head material
Colour of liquid container

10. Recycling and disposal

For disposal of liquids and disposal of the activated carbon an absorption operation, comply with
the national and regional regulations and with the instructions stated on the safety data sheet is-
sued by liquid manufacturer.
Action
Check all components for damage and secure seating.
Check the safety valve for correct operation.
Release the pressure, empty the liquid container and clean it care-
fully.
Smear the seals at the nozzle and all the O-rings with Vaseline.
Possible cause
Components not correctly
screwed tightly together.
Nozzle blocked.
Pressure in the liquid container
too high.
VL1
1.5 ltr
3 bar
EPDM
PP
White
www.hoffmann-group.com
Action
Check that all components are
correctly seated, and screw
them tightly together if neces-
sary.
Unscrew the nozzle and clean it.
Use the safety valve to fully re-
lease the pressure.
VA1 VS1
1.5 ltr 1.5 ltr
3 bar 3 bar
Viton Viton
PP PA
Steel blue Black
en
13