Table of Contents
Advertisement
VCR, video disc
player, etc.
Rear of TV
SPEAKER
<Ozo : Signal flow
Preparing for use
1 Turn on the TV.
2 Press the TV/VIDEO
button on the TV or an input
select button on the Remote Commander so that
"VIDEO
1" or "VIDEO 2" appears on the screen.
VIDEO 1: for equipment connected to VIDEO 1 IN
VIDEO 2: for equipment connected to VIDEO 2 IN
To view one TV program while recording another
Press the TV/VTR
mode select button on the VCR or
Remote Commander so that the VCR is in TV mode.
Press the TV button on the Remote Commander,
and
select the channel you want to view.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR
mode select button on the
VCR is set to TV. Reselect the desired channel with the
buttons on the TV or the Remote Commander.
Operating your equipment
When using a Sony infrared remote control VCR,
video disc player or multi disc player, the equipment
can be operated with the Remote Commander
supplied with the TV.
as
position according to the equipment you want to
operate.
VTR 1: Sony Betamax VCR
VTR 2: Sony 8 mm VCR
VTR 3: Sony VHS VCR
MDP: Sony video disc player or multi disc player
Set the VTR 1/2/3/MDP selector to the appropriate
Operate the equipment with the VCR/multi
disc player
operation buttons on the Remote Commander.
To return to TV mode
— Press the TV/VIDEO button on the TV so that a
channel number appears on the screen.
— Press the TV button on the Remote Commander.
Chapter 4: Other Connections
35
quawdinba
oapia
Buysauue
Advertisement
Table of Contents
