Table of Contents
Advertisement
Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system.
Always disconnect the negative (–) cable first, and reconnect it last.
* Not available on all models
uuBatteryuCharging the Battery
1Battery
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Clean the terminals with a damp towel. Cloth/towel
dry the battery. Coat the terminals with grease to
help prevent future corrosion.
When replacing the battery, the replacement must be
of the same specifications.
Consult a dealer for more information.
The indicators for the Adaptive Cruise Control
(ACC)
*
, Adaptive Cruise Control (ACC) with Low
Speed Follow (LSF)
*
, Road Departure Mitigation
(RDM)
*
, Vehicle Stability Assist® (VSA®) system,
Vehicle Stability Assist® (VSA®) OFF, Low Tire
Pressure/TPMS
*
and Collision Mitigation Braking
System
TM
(CMBS
TM
)
*
may come on after re-
connecting the battery. Drive a short distance at
more than 12 mph (20 km/h). The indicators should
go off. If they do not, have your vehicle checked by a
dealer.
595
Advertisement
Chapters
Table of Contents
