Table of Contents
Advertisement
■
How the System Activates
The system becomes ready to start searching for lane markings when all the
following conditions are met:
• The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h).
• The vehicle is on a straight or slightly curved road.
• The turn signals are off.
• The brake pedal is not depressed.
• The wipers are not in continuous operation.
• The vehicle is not accelerating or braking, and the steering wheel is not being
turned.
• The system makes a determination that the driver is not actively accelerating,
braking or steering.
■
RDM On and Off
Indicator
RDM Button
* Not available on all models
Press the RDM button to turn the system on
and off.
u
The indicator in the button comes on and
the message appears on the driver
information interface when the system is
on.
uuHonda Sensing®
*
uRoad Departure Mitigation (RDM) System
1How the System Activates
The RDM system may automatically shut off and the
indicator comes and stays on.
2 Indicators P. 76
RDM system function can be impacted when the
vehicle is:
•
Not driven within a traffic lane.
•
Driven on the inside edge of a curve, or outside of
a lane.
•
Driven in a narrow lane.
1RDM On and Off
When you have selected Warning Only from the
customized options using the driver information
interface or audio/information screen, the system
does not operate the steering wheel and braking.
2 Customized Features P. 124, 337
The indicators for the Adaptive Cruise Control
(ACC)
*
, Adaptive Cruise Control (ACC) with Low
Speed Follow (LSF)
(RDM), Vehicle Stability Assist® (VSA®) system,
Vehicle Stability Assist® (VSA®) OFF, Low Tire
Pressure/TPMS
*
and Collision Mitigation Braking
System
TM
(CMBS
TM
the battery. Drive a short distance at more than 12
mph (20 km/h). The indicators should go off. If they
do not, have your vehicle checked by a dealer.
Continued
*
, Road Departure Mitigation
) may come on after re-connecting
523
Advertisement
Chapters
Table of Contents
