Rear View Connections - Sceptre E195BV-SRR Manual

Rear View Connections

HEADPHONE – This connection is for headphones to be attached to
1.
the Display.
SPDIF - This connection port is used for sending out digital audio
2.
signals to digital surround sound receivers. The black (Optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
YPbPr/AV – This connection port is for DVD players or satellite /
3.
cable set-top boxes that use component cables. From left to right,
connect green, blue, and red for video, and then connect white for
left channel audio, and red for right channel audio. This port also
doubles as composite AV port. Connect the yellow RCA jack to
the green and then red / white RCA jack for audio.
VGA - This connection port connects to a PC for video using VGA
4.
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
Audio In - This connection port is for people who want to provide
5.
audio to the Display when using a PC or a DVI video device. The
sources use 3.5mm mini-jack audio cable.
HDMI – HDMI connects to devices that use HDMI cable, such as
6.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
- 12 -
www.SCEPTRE.com
SCEPTRE E195 HD Display User Manual