Table of Contents
Advertisement
Listening to CDs
Audio CD and MP3/WMA CD can be played back in this player.
1. Insert the CD:
2. Select the CD function: The display
will show the total number of tracks
(files).
3. Start the CD playing:
4. To stop a CD playing:
Listening to CDs - more you can do
Pause or restart a CD
Press B B / [] on either the player or the remote control during playback.
Press this button again to resume play.
Search for a section within a track
Hold ./> on either the player or the remote control during playback.
Skip to another track
Press ./> on either the player or the remote control.
Speed search for tracks
Hold ./> on either the player or the remote control only in stop status.
Track skips continuously in turn.
Listen to your tracks again and again
Press MODE on the remote control repeatedly, the display changes in the
following order, RPT 1 - RPT ALL - RANDOM - OFF.
Listen to your tracks in any order
Up to 20 tracks on a CD can be listened to in the order of your choice. Insert a
CD and wait for it to be read. Press PROGRAM/MEMO on the remote control,
then use ./> to select the track. Press PROGRAM/MEMO again to save
and select the next track. Press B B / [] . To clear your selection, press x x twice .
NOTES :
• Do not push a disc forcibly into the CD slot.
• Do not pull or push a disc while a disc is ejected.
• Press Z again to reinsert the disc after ejecting it.
The advantage of connecting your portable USB player through the
system's USB port is that the portable device can be controlled from the
ON PLAYER
ON REMOTE
system.
Z
FUNC.
FUNCTION
1. Connect the portable player to the
B B / []
B B / []
2. Select the USB function: The dis-
x x
x x ENTER
3. Select the folder :
4. Start the USB playing:
5. To stop a USB playing:
6. Before disconnecting the portable
7. Remove the USB player:
NOTES :
• Some portable devices are not compatible with this system.
• When various cards are connected to the Memory Card Reader, the first
detected card is recognized.
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the USB device might not be
recognized.
• A device using NTFS file system is not supported (Only the FAT (16/32) file
system is supported.).
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phones are not supported.
• This unit is not supported when the total number of files is 1000 or more.
Playing music using USB
system using a USB cable (not
supplied):
play will show READ, followed by the
number of files displayed.
USB player, change to any other
function by pressing:
ON PLAYER
ON REMOTE
FUNC.
INPUT
FOLDER•PRESET
B B / []
B B / []
x x
x x
FUNC.
FUNCTION
or
INPUT
7
Advertisement
Table of Contents
