Philips 190V5FB User Manual page 8

Product Information
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are
calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down
button to go to Adjust Color and press OK again. Then move the down button to go to sRGB
and press OK again.
Exit this OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you
change either of these, the monitor will exit the sRGB mode and go to a color temperature
setting of 6500K.
* This data is subject to change without notice.
Resolution & Preset Modes
• Maximum
•
Recommended
15 user definable modes
15 factory preset modes:
file:///D|/My%20Documents/dfu/W9/english/190v5/product/product.htm (3 of 7)2005-03-07 5:50:36 PM
RETURN TO TOP OF THE PAGE
1280 x 1024 at 75 Hz
1280 x 1024 at 60 Hz