Troubleshooting - Indesit DFO 3T133 A F Quick Manual

Quick Guide

TROUBLESHOOTING

PROBLEMS POSSIBLE CAUSES
No water in the water supply or the tap is closed.
The dishwasher does
not fill the water. Display
The inlet hose is bent.
shows: and F6, both
On/Off and START/Pause
The sieve in the water inlet hose is clogged; it is
LEDs are blinking rapidly.
necessary to clean it.
Dishwasher finishes the
Drain hose positioned too low or siphoning into
cycle prematurely.
home sewage system.
Display shows: F15 and
both On/Off and START/
Pause LEDs are blinking Air in water supply.
rapidly.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and
reboot.
After having carried out the verification and cleaning, turn off and turn on the dishwa-
sher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check for
siphoning into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
EN
IEC 436
:
3