Table of Contents
Advertisement
31
Slide the opening tool (L) back and forth along the bottom right edge to slice through
the adhesive.
Do this disassembly process within 1 minute.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 4 cm.
As the screen can be damaged by excessive force, be careful not to damage the
•
screen.
Be careful that the suction cup does not adhere to the area where the tape or
•
sticker is attached.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the screen to further soften the adhesive. When
reheating, it should be heated no longer than 40-60 seconds.
Disassembly and Assembly
85
Advertisement
Table of Contents
