Table of Contents
Advertisement
Main Board Remove
The PBA can only be replaced at an authorized repair shop. If the PBA is faulty,
contact Samsung for further instruction.
1
Check and remove the 3 screws on main board.
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
2
Using the tweezers or opening pick, separate connectors and coaxial cable
connectors (Red/Black/Orange) from the main board.
Be careful not to damage the near components and cables.
Disassembly and Assembly
101
Advertisement
Table of Contents
