The Singing Machine iSM-1028 N Instruction Manual page 19

TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
No sound when audio is
going through TV, VCR
or home stereo.
Source Selection on your TV,
VCR or home stereo is not set
properly.
Select AUX IN as the source for
yourTV, VCR or home stereo.
Improper Connection to
stereo system or PA.
Follow directions on the "Audio
Connection" page for connecting to
a home stereo system.
Video cable is not connected
properly to the TV.
Connect the video cable to the
Singing Machine's VIDEO OUT
and to the TV VIDEO IN.
Source selector on TV is not
set to VIDEO.
Using your TV Remote to select
VIDEO input.
No song lyrics appear
on the TV screen.
TV does not have video line
input.
Connect from VIDEO OUT of the
system to the VIDEO IN on your
VCR or Connect to an RF
Modulator and then to the TV
cable input. Check the disc to
be sure it is a CDG.
A CDG is loaded but the
CDG indicator is not lit.
Check disc to be sure it is clean.
No sound from mic.
Mic volume control.
Adjust mic volume to max, and
then re-adjust to a comfortable
level.
Mic is off.
Turn on mic with the ON/OFF
switch located on the microphone.
While playing a CDG and
singing with the
AVC is activated to Maximum. Adjust AVC to Minimum.
microphone, the music or
vocals cut out.
You are playing a music only
track.
Play track that includes music and
vocal.
Music and Vocals are
playing at a high speed.
Key control is set to +4. Adjust key control to 0.
While playing a CDG
track with music and
vocals, only music or
vocals play.
Balance is set either to the left
or right.
Adjust balance to mid point.
E18