Troubleshooting Guide - The Singing Machine iSM-1028 N Instruction Manual

TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
PROBLEM POSSIBLE CAUSE SOLUTION
No power when ON/OFF
button is on.
No power plug connection at
the AC outlet.
Insert the power plug into the AC
outlet.
No power when plugged
The AC outlet may not have
power.
Check the outlet with a working
lamp or other electrical appliance.
in.
AC plug is not secure on the
back of the unit.
Securely plug cord into the back of
the unit.
No sound.
Volume control is set to
minimum.
Turn up the volume.
Volume control on TV set/PA
system is set to minimum.
Turn up the volume onTV/PA
system.
TV set/PA system power is
OFF.
Turn on the power on TV/PA
system.
AUX OUT jacks not
connected.
Follow directions on the "Audio
Connection" page.
CD PLAYER does not
Disc is inserted upside
down.
Insert disc correctly.
Disc is dirty. Wipe clean with soft cloth.
Disc is scratched. Use a new disc.
Disc is warped. Use a new disc.
work normally or the
LED displays "un",
or "
no
"■
A nonstandard disc is
inserted.
Only use discs bearing standard
logo.
Lens is dirty. Use a CD lens cleaner.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to let
it dry out.
Singing Machine needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
E17