Pioneer CT-W505R Operating Instructions Manual page 15

TAPE COPYING trom Deck i to DECK 1)
@ The tape copying function permits you to copy the contents of a
tape from DECK i to DECK Il.
@ The SYNCHRO COPY button lets you select 3 types of copying:
copying at norma! speed while listening to the song, copying an
entire tape in half the time with high-speed copying. or copying
while reducing noise between songs with TDNS copy.
Load a tape for playback into DECK I and a tape for
recording into DECK i.
. Set the REV MODE switch.
Set the tape transport direction.
. Press the SYNCHRO COPY button to select either
NORMAL, HIGH speed, or TONS.
@ Tape copying is always performed in the direction indicated by
the tape transport indicator (> or <4). To change this direction,
press the desired playback button (i or <<), then immediately
press the stop (@) button.
4. Press the SYNCHRO COPY button to select either
NORMAL or HIGH speed or TONS.
NORMAL : Tape copying at normal speed allows you to listen
during playback (COPY indicator lights).
a
PWN
HIGH : Tape copying at double speed (COPY indicator
flashes}.
TONS : Tape copying that reduces noise between songs
({"Tdns" appears on the counter for deck {!, or the
COPY indicator flashes.)
To stop copying
Press the stop (™) button of either deck. Both decks will stop
[1 LAST MEMORY FEATURE
This unit uses non-erasable non-volatile semiconductor memory to
provide semi-permanent (about 10 years) storage of the most recent
AUTO BLE data in addition to the on/off positions of other switches
and buttons. As a result, the most recent settings are stored in the
memory even when the power cord is disconnected.
BLE data
FLEX (1/47) System mode (On or off}
STANDBY ON/OFF
Tape counter number data
ALCA data
DIRECTION data
To ciear all the memorized data and set the unit to its
original data settings
Press the DECK Il recording mute (0) button and DECK | counter
mode (TIME/COUNT) button simultaneously.
NOTES:
© The tape in DECK If will be copied In the same type of the
DOLBY NR (B/C} as DECK I's tape, regardless of its own sat-
ting. When listening to the copied tape, set the type of the
DOLBY NR {B/C} to the type used for recording.
@ ife nearby television set is on while high-speed copying is being
performed, a high-pitched interference sound may be heard on
the tape. In this case, either use the normal speed copying func-
tion, or turn off the television.
e During high-speed copying, none of the operation buttons will
function except for the stop il) button,
During normal speed copying, the recording mute {O) and pause
Ai) buttons of deck fi also function.
® Tape copying is cancelled when either of the two tapes reaches
the end. Therefore it is advisable to use tapes of the same langth.
@ The sound quality of the copied tape will be somewhat less than
the original. Therefore when making more than one copy, always
record from the original tape (do not make @ copy of a copy).
@ The recording level adjustment is not necessary during tape copy-
ing.
© The effect of TONS copy may not be exhibited well with a tape in
which the noise between musical tunes and musical signal can-
not be distinguished clearly.
in this case, use the NORMAL or HIGH speed copy function.
—
15
<RRB1170>
En