Tuning In A Station - Sony CDX-5070 Operating Instructions Manual

Tuning in a Station
wer
Searching for the Stations
Automatically — Automatic Tuning g
Select the desired band. When an FM stereo program a
with a sufficient signal 8
ofMe strength is tuned in 3
3
@FM{ BLY
2 Press the SEEK button.
The "STEREO" indication will
— Seale appear.
Avoiding the automatic tuning
For lower frequencies For higher frequencies from stopping on stations too
frequently (Local Seek Mode)
Press the SENS button lightly to
The scanning stops when a station is received. Press the
button repeatedly until the desired station is received. get the "LCL" indication. Only
the stations with relatively strong
signals can be tuned in. The local
seek mode functions only when
operation.
— Manual Tuning
If FM stereo broadcasting is
Select the desired band, then press the MANU button. sascey to receive (Monaural
ae- | mw | toe] [ <<— | wow | Press the SENS button lightly to
Ur hy get the "MONO" indication. The
sound will improve, but it will
Note (CDX-5270/5470)
PREVENTING ACCIDENTS! e If you press the SENS button
Pet gos Ne ie aaa ae ee oh, A, a eee = for more than two seconds, the
While you are driving, the use of the Automatic Tuning and the loudness function will work. To
Memory Preset Tuning is recommended in favor of the Manual turn the loudness off, press the
Tuning. button again for more than two
seconds.
e You can use the manual tuning
with the unit onlv.