Replacing The Blades - Toro Haven 20459 Operator's Manual

Replacing the Blades

Always mow with sharp blades. Sharp blades cut cleanly without tearing or shredding the
grass.
The blades are sharp; contacting the blades can result in serious personal injury.
Use care when replacing or cleaning the blades.
1. Press the stop button and wait for all moving parts to stop.
2. Tip the mower over.
3. Using a Phillips-head screwdriver, remove the
blade screws and blades.
4. Install the new blades using the previously
removed screws.
If the screws are worn or stripped, replace them.
Contact your Authorized Service Dealer.
5. Turn the mower over.
6. Press the play (resume operation) button on
the control panel.
3448-238B
WARNING
G430237
Page 6–8 Maintenance: Replacing the Blades