Table of Contents
Advertisement
4. Mounting
Mount the base on solid surface such as a structural wall or girder.
Mark and drill holes for mounting of base. Using appropriate hardware (not supplied) mount base securely in orientation shown.
To preserve the specified IP rating, fit M6 x 30mm x 1.5mm neoprene washers (one per fixing) between the product and the mounting surface.
Plug the cable from the detector head into the
connector on the PCB in the base.
Locate the Detector head on the base. Grip sides
of Detector head and rotate clockwise to lock
together. Ensure the 'Pip and Dip' details align.
Page 7
Advertisement
Table of Contents
