ASROCK H610M-HDV/M.2 R2.0 User Manual page 51

CPU Cache Ratio
The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
SA PLL Frequency
Configure SA PLL Frequency.
BCLK TSC HW Fixup
BCLK TSC HW Fixup disable during TSC copy from PMA to APIC.
FLL Overclocking Mode
Nominal is good for normal core ratio overclocking. Elevated and Extremely
El¬evated are good for high BCLK OC.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel Speed Shift Technology
Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-sates.
Intel Turbo Boost Max Technology 3.0
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
H610M-HDV/M.2 R2.0
H610M-HVS/M.2 R2.0
43