Table of Contents
Advertisement
3
Click
Apply changes
Before you configure the MCU to use, and register conferences to, a SIP
i
registrar, you must set up the MCU and its conferences on that SIP
registrar.
Step three: Add endpoints (optional)
One way to add participants to a conference that you create is to have the MCU
automatically call them when the conference starts. To do this, you configure their
endpoints on the MCU. When you set up a conference, you can choose the
endpoints from the
each endpoint's details every time. Participants that are pre-configured for a
conference will automatically be called by the MCU to join that conference.
To define pre-configured endpoints:
1
In the web interface of the MCU, go to
To add a H.323 endpoint, click
To add a SIP endpoint, click
To add a VNC screen, click
2
Configure the endpoint settings you require, using the online help for further
assistance.
3
Click
Add endpoint
.
Pre-configured participants
Add VNC
.
list. This is easier than entering
:
Endpoints
Add H.323
Add SIP
Configuring the MCU
11
Advertisement
Table of Contents
