Care And Cleaning; Hob; Hob Frame; Cooking Sensor - Siemens EH9 SK3 Series Instruction Manual

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the
Technical Assistance Service, you should consider the
following advice and warnings.
Indicator Malfunction
none The electric power supply has been cut off. Use other electrical appliances to check whether there has been a
The appliance has not been correctly
connected following the connection
diagram.
Electronic system malfunction.
The control panel is damp or an object is
flashes
"
resting on it.
+ number / Electronic system malfunction.
"§
+ number /
š
+ number
¡
There is an internal error in the operation.
"‹
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
18
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■

Cooking sensor

The glass lens on the cooking sensor must be kept clean.
Regularly clean away splashes of grease and dirt using cotton
swabs or a soft cloth with glass cleaner.
Inappropriate cleaning products
Do not use:
Scouring pads.
■
Cleaning cream.
■
Solution
power cut.
Check that the appliance has been connected correctly according to
the connection diagram.
If in the above checks, the malfunction is not resolved, contact the
Technical Assistance Service.
Dry the control panel area or remove the object.
Unplug the hob from the mains. Wait about 30 seconds before
plugging it in again.*
Unplug the hob from the mains. Wait about 30 seconds before
plugging it in again.*