Table of Contents
Advertisement
The Measurement box shows the current state of the device -
switching on outputs, output voltage and current, stabilization mode
- by voltage or current.
Remarks
The APS-7306 device in the basic configuration has some features of
operation:
- there is no command to turn off remote operation
- to switch to local control, turn off and then turn on the power
supply of the device.
- display of the current parameters on the screen of the device may
not coincide with the readings of the program in the absence of a
load connected to the device
4. Service
4.1 Terms of Use
Supply and input voltages, storage and operating temperatures in
accordance with the general section of technical data.
• Relative humidity not more than 90% at 25°C.
• Atmospheric pressure from 495 to 795 mm.
• Storage and operation rooms must be free of dust, acid vapors,
alkalis, and corrosive gases.
• Do not drop or vibrate.
• After staying under extreme conditions (storage, transportation),
the exposure time of the device in normal (operational) conditions is
at least 2 hours.
www.tmatlantic.com
11
Advertisement
Table of Contents
