Download Print this page

Technical Specifications - Crate VC-50H Owner's Manual

Crate vc-50h vintage club amplifier owner's manual

Advertisement

VC-50H Vintage Club Amplifier

TECHNICAL SPECIFICATIONS:

Output Power Rating
Input Impedance
Maximum Signal Accepted
Signal To Noise Ratio
Gain
Tone Control Range
Line Out Level
Tube Types
Power Requirements
Size and Weight
To keep this amplifier looking its best, avoid abrasive cleaners. Wipe the cabinet clean using a
slightly dampened cloth. Never use abrasive cleaners on the hardware since they could damage
©2001 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
50W RMS @ 10% THD, 8 ohm load, 120 VAC
1M ohm
2.8V peak to peak
Channel B:
Channel A:
Channel B:
Channel A:
Channel B:
Channel A:
375mV RMS @ full power output
Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5
120VAC, 60Hz, 145VA/30W, 170VA/50W
100/115VAC, 50/60Hz, 145VA/30W, 170VA/50W
230VAC, 50/60Hz, 145VA/30W, 170VA/50W
21.25"W x 11"H x 11.25"D, 35 lbs
their protective coatings.
Crate continually develops new products, as well as improves existing ones.
For this reason, the specifications and information in this publication
are subject to change without notice.
www.crateamps.com
P/N 47-547-13 • 05/01
52dB
58dB
75dB
68dB
Bass:
12dB range @60Hz
Mid:
10dB range @600Hz
Treble:
7dB range @4kHz
Bass:
20dB range @70Hz
Treble:
16dB range @2kHz

Advertisement

loading