Page 1
VC-120H Vintage Club Amplifier OWNER’S MANUAL...
Page 2
You are now the proud owner of one of the newest and most versatile tube amplifiers available for the guitar! The CRATE VC-120H offers flexibilty and portability with two sep- arate channels for a uniquely rich palette of tonal variety and simplicity of control over your sound.
VC-120H Amplifier The Front Panel Controls and Their Use: 1. POWER SWITCH: Toggle this switch to the ON position to turn on the amplifier. NOTE: Always turn the power switch ON FIRST, OFF LAST. Use the Standby switch (toggled to the Standby position) when first turning the amp on as well as during breaks.
VC-120H Amplifier EFFECTS LOOP FOOTSWITCH SEND RETURN EFFECTS LEVEL TIP = CH. SELECT RING = LOOP ON/OFF SLEEVE = GROUND The Rear Panel: 17. FOOTSWITCH JACK: Connect the supplied two button footswitch for control of channel switching and the effects loop on/off.
VC-120H Amplifier Some Suggested Settings: Good ’n Crunchy: Nice ’n Clean: Bright ’n Crunchy: Jazz Tone: Viola: Strong Blues: Blitzkrieg: It Goes to “12”: *Set Reverb to taste...
VC-120H Amplifier System Block Diagram: TRBL BASS GAIN INPUT STAGE BOOST BOOST GAIN CONTROL GAIN STAGE BRIGHT REVERB SEND GAIN STAGE GAIN STAGE CH. A CH. B TRBL TONE SHAPING GAIN STAGE BOOST OUTPUT DRIVER REVERB RETURN REVERB PRESENCE LEVELS CH.
Power Requirements Size and Weight The VC-120H is covered with a durable black Tolex it clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents directly onto the cabinet, and stay away from abrasive cleansers which could damage the finish.
Need help?
Do you have a question about the VC-120H and is the answer not in the manual?
Questions and answers