Advertisement
CONNECTIONs
3.
The
blue
plug
socket
should
between
the
connector
behind
monitor.
➢
"CAMERA-in" ：for CVBS reverse video in。
➢
Green wire marked "reverse-in" ： when=12V， reverse
picture will be displayed based on DIP 4/5.
➢
Green wire marked"Reverse-out" ： the reverse signal
output based on CAN code, it can be used to supply
cameras【3A max.】
The white connector : insert behind
the LCD for power supply.
The OBD black: to OBD socket for
reverse/guide line.
4 / 7
and
be
GVIF
When power the box manually:
➢
Connect the yellow/Black【of the 2X6 connector】
to ACC，GND respectively.
➢
Connect the white/Gray【marked manual ACC】
to ACC。
The GVIF and power
connector
behind
monitor.
3-LEDs： The left side one
for power, the right 2 for
can activities.
The phone mirror device
sends HD video onto RGB
port.
The white/Grey wire【marked manual
ACC】to ACC to make the box work
manually.
This Gray wire: to the steering voltage
wire for input switching.
When AV1/AV2 both used, this wire has
5V to switch a relay to toggle the audio
selection before AUX.
Advertisement
