Advertisement
DIP
1
2,
3
4
5
6，7，8
The Function of DIP1/2/3：
With the extra keypad, or the OEM "Call-off" key on steering wheel, the installer can switch in the inputs:
"OEM→RGB→AV1—AV2→OEM"，the DIP 1，2，3 to enable the RGB，AV1，AV2 respectively.
The RGB port is suggested for phone-mirror device, although it can also use AV1 or AV2 【this port has
very high resolution display compared with CVBS. The viewers can even see navigation text clearly on car
screen.】
AV1，AV2 can be used to connect to TV or DVD, or 360 bird view.
Application examples
Only reverse video
installed
Only 360【CVBS】
installed
Only phone - mirror
installed
Phone mirror + 360 bird view【DIP5 DOWN，
installed.
3 / 7
ON-side（DOWN）
RGB high definition port is enabled
AV1 enabled
AV2 enabled
DOWN=RGB port【360 high definition bird view】
picture displayed when in reverse.
When in Reverse （Green=12V） ,show inserted RGB
or CVBS based on DIP4
When ONLY DIP8=DOWN among DIP678:
The GVIF=RX2016's 12.3-inch with very high resolution pixels.
The DIP7 is for protocal selection：
Usually DIP7 should stay UP, when black screen is seen in inserted display, try it down. Some old cars like
10~12 Rover, 08-Cadillac needs this protocal.
The DIP6 is for Car selection:
UP= Usually for the new Lexus，like 2015 NX，CT200，ES，IS etc, they use 7 or 6.5 inch screen usually.
DOWN= some old cars like 2013 RX。
Note：
The wrong set of DIP6，7，8 may lead to black screen or noisy screen in inserted video, but nothing will be
damaged.
DIP 1，4，5
【DIP5 DOWN，
4UP，1UP】
【DIP5 DOWN，
4UP,
1UP】
【DIP5 UP，
4 DOWN，1DOWN】
4UP，1DOWN】
OFF side （UP）
RGB port disabled
AV1 disabled
AV2 disabled
UP= CVBS【camera-in】video displayed when in reverse
when in reverse（Green=12V）show OEM picture.
Cvbs goes from "camera-in"，
Green wire=12V to show reverse video。
Cvbs goes from "camera-in"
Green wire=12V to show 360-CVBS video。
The phone-mirror device goes to RGB port.
The user press keypad or Call-off to show RGB-port picture.
The Green wire=12V to show CVBS on "camera-in" port.
Advertisement
