Download Print this page

cartronic VL2-LEXUS16 Instruction Manual

Advertisement

Quick Links

This interface can insert video onto 2012~2016 Lexus car screens, specially designed to insert Reverse camera, blind
spot camera video,High definition phone picture mirroring, and 360 bird view pictures.
It fits almost all GVIF car screens, 7-inch, 8-inch, or 12.3- inch. Also Chevrolet, GM, Rover[2012] and other car
brands.
Suitable for cars: 【almost all GVIF screens】
2016-RX
2015 before Lexus GIVF
Features:
Based on sold GVIF interfaces, this one is specifically designed to insert these functions:
(1) Reverse camera video
(2) 360 bird view cameras or blind spot cameras.
(3) High definition phone-mirroring onto GVIF screen, the RGB connection makes text of
phone-navigation clearly displayed onto car screen, which is much better than CVBS link.
Easy to install. O n Lexus cars it can produce 100% feeling guideline with PDC display。And OEM
"Call-off" key on the steering wheel is used to switch the inputs.
Manually switch and reverse function is also offered, which makes this GVIF interface fits almost every
GVIF car. The installer can disable the automatic reverse and make a manual reverse by giving 12V to a
green wire and manual switch can be done by a keypad.
DIP6/7/8 can be used to tune the GVIF output resolution and protocol for every GVIF car.
1 / 7
VL2-LEXUS16 installation manual v161019
2015- IS/ES/NX/CT200
other GVIF Car screens, eg: GM like Malibu, GL8, Opel, Chevrolet etc.
(160808)

Advertisement

loading

Summary of Contents for cartronic VL2-LEXUS16

  • Page 1 VL2-LEXUS16 installation manual v161019 (160808) This interface can insert video onto 2012~2016 Lexus car screens, specially designed to insert Reverse camera, blind spot camera video,High definition phone picture mirroring, and 360 bird view pictures. It fits almost all GVIF car screens, 7-inch, 8-inch, or 12.3- inch. Also Chevrolet, GM, Rover[2012] and other car brands.
  • Page 2: Dip Settings

    1. Accessories For the picture below, the accessories are: GVIF video wire 【should be inserted behind the monitor: Blue-plug for monitor, and blue-socket for the OEM-plug to monitor. The black 2X4 plug for the interface box】. Key pad【for toggle the input from OEM to inserted video, if the installer does not use the OEM call-off on steering wheel to switch.】...
  • Page 3 OFF side (UP) ON-side(DOWN) RGB high definition port is enabled RGB port disabled AV1 enabled AV1 disabled AV2 enabled AV2 disabled DOWN=RGB port【360 high definition bird view】 UP= CVBS【camera-in】video displayed when in reverse picture displayed when in reverse. When in Reverse (Green=12V) ,show inserted RGB when in reverse(Green=12V)show OEM picture.
  • Page 4 CONNECTIONs blue plug socket should The GVIF and power between GVIF connector behind connector behind monitor. monitor. 3-LEDs: The left side one for power, the right 2 for can activities. The phone mirror device sends HD video onto RGB port. ➢...
  • Page 5 The Call-off key signal wire location: RX200: the green wire pointed by the NX200 : probe. the red wire pointed. ➢ The user can also use the keypad to switch. CAN wire locations: CAN wire is used to generate reverse and guideline signals, usually it is on the OBD connector.
  • Page 6 4.The Side keys. The input box has 3 side keys, the installer may use it to tune the picture display, and touch function for the connected DVD or other devices. The 3 keys are : menu, +, -. The first 3 options have separate state memory.
  • Page 7 6.Parameters name parameters Video amplitude 0.5-2Vpp with 75 Ohm Power consumption 4.8W [0. 4A @12V] Stand by current < 10uA Work temperature -40℃- +85℃ Dimensions 8.8cm * 6.6cm * 2.7cm CVBS NTSC suggest. PAL acceptable. RGB protocal Stand VESA VGA protocal with 800X600@60Hz: Pin1, 8 are: Red, Green, Blue, Hsync, GND Vsync:...