Advertisement
1. Accessories
For the picture below, the accessories are:
GVIF video wire 【should be inserted behind the monitor:
1.
2.
Key pad【for toggle the input from OEM to inserted video, if the installer does not use the OEM
call-off on steering wheel to switch.】
3.
Video input wire
Harness for power-supply and CAN。 【
4.
2. DIP settings：
4-BIT DIP settings： 【the red one on the right picture】
No function, should all stay UP.
8-BIT DIP settings： 【the black one on the left picture】
2 / 7
Blue-plug for monitor, and blue-socket for the OEM-plug to monitor.
The black 2X4 plug for the interface box】.
The white 2X12 should be inserted behind monitor。
CAN is used to take reverse/guide-line signals from OBD】
Advertisement
