Table of Contents
Advertisement
WASH
SELECTION
RINSE / ORY SELECTION
POTS/
UIGHT/
RINSE ENERGY SAVER
PANS
NORMAL
CHINA
0
NO MEAT ORY
RINSE/DRY SELECTIONS
RINSE & HOLD CYCLE is used
to rinse partial loads of dishes until
a full load is accumulated. No de-
tergent is used. Dishware is kept
moist until a complete wash and
dry cycle can be run.
What happens during this cycle?
This cycle provides one rinse.
ENERGY SAVER—NO HEAT
DRY can be used with any Wash
Selection to eliminate the heat dur-
ing the dry portion of a cycle. The
fan of the drying system will con-
tinue to operate, helping the dishes
to air dry naturally. Under certain
conditions, you may find a few
drops of water on the dishware and
silverware at the end of this cycle.
TO CANCEL A CYCLE
The Cycle Selection Dial may be
used to cancel any cycle in pro-
gress. If water is present in the
dishwasher, turn the dial slowly to
the drain portion of the wash or
rinse. You will hear water draining
when you have advanced to the
proper location. Let the dishwasher
drain completely. Lift the door han-
dle and advance the dial to the
Pots/Pans cycle. This cancels the
cycle.
If water is absent from the dish-
washer, lift door handle to stop
dishwasher action. Relatch door
and advance dial to Pots/Pans
cycle. This cancels the cycle.
TO START A NEW CYCLE—
Open dishwasher; check detergent
dispenser to be sure it is properly
filled. Close and latch door; select
the desired new cycle.
ADDING DISHWARE DURING
ACYCLE
You can add a forgotten item to the
dishwasher anytime before the
main detergent wash portion of the
cycle. To stop the cycle, just un-
latch the door handle. However,
opening the door during a cycle re-
duces the cleaning power, so try to
load all items before starting the
cycle.
TO RESTART DISHWASHER
Close the door and latch the han-
dle, push cycle button originally se-
lected and if desired, the Energy
Saver button. The cycle will start
exactly where it was stopped.
Advertisement
Table of Contents
