Table of Contents
Advertisement
• Make sure the physical connection between the router and the modem is proper.
• Modify the LAN IP address of the router.
Note:
Most TP-Link routers use 192.168.254.1/192.168.0.1/192.168.1.1 as their default LAN IP address, which may
conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with
your modem and you can't access the internet. To resolve this problem, we need to change the LAN IP address of
the router to avoid such conflict, for example, 192.168.2.1.
1 ) Visit
http://tplinkmodem.net
Link ID or the password you set for the router.
2 ) Go to
Advanced
3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1
as an example.
4 ) Click Save.
• Restart the modem and the router.
1 ) Power off your modem and router, and leave them off for 1 minute.
2 ) Power on your modem first, and wait about 2 minutes until it get a solid cable
or Internet light.
3 ) Power on the router.
or http://192.168.254.1, and log in with your TP-
>
Network
>
LAN
Settings.
94
Advertisement
Table of Contents
