Table of Contents
Advertisement
Chapter 9
Note: Before you enable
VPN
static IP address for router's WAN port and synchronize your
3. In the
Client IP Address
leased to the devices by the PPTP VPN server.
4. Enter the
Username
5. Click Save.
6. On the client devices, create a PPTP VPN connection. The official supported platforms
include Windows, Mac OSX, Linux, iOS, and Android.
7. Launch the PPTP VPN program, add a new connection and enter the domain name
of the registered DDNS service or the static IP address that is assigned to the WAN
port, to connect the client device to the PPTP VPN server.
Step 2 Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to
Start
>
Control Panel
2. Select
Set up a new connection or
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
field, enter the range of IP addresses (up to 10) that can be
and
Password
to authenticate clients to the PPTP VPN server.
>
Network and Internet
network.
System Time
with internet.
Windows built-in PPTP software
>
Network and Sharing
VPN Server&Client
Center.
58
Advertisement
Table of Contents
