Rack Dry Cycle; Other Features - Haier HLF11PC User Manual

Rack Dry Cycle
i Louder _ On _
i o,
_ned
1. Press "Power On/Off" button to power on.
2. Press "Timed/Cycles" button and select "Rack Dry" cycle.
3. Press "More Time" and "Less Time" buttons to set a suitable dry time.
4-7. Press buttons "Temp," "Cycle Signal," "Delay Start," and "Wrinkle Care,"
to define your desired program.
Note: For "Rack Dry" program, use of buttons "Temp," "Cycle Signal,"
"Delay Start," and "Wrinkle Care" is the same as for
auto-programs. "Dryness Level" is here inactive, pressing of
which will get alarms.
8. Press "Start/Pause" button
Other Features
Your dryer also has the following features for your convenience:
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after every
use (read Care and Cleaning Guide Section).
Leveling Legs:
Your dryer has four leveling legs which are located in the front and rear cor-
ners of your dryer. After installing your dryer in its final position, you can level
your dryer.
Leveling legs can be adjusted by turning them clockwise to lower your dryer
or by turning them counterclockwise to raise your dryer.
Note: It is very important that you level your dryer to prevent it from
moving during operation.
11