Setting The Operation Mode; Setting The Temperature - Fujitsu Airstage UTY-DTGYZ1 Manual

2-1-3

Setting the operation mode

Click the mode button to be selected.
a
Notes
• When the function does not exist at the objective unit, setting cannot be selected.
Buttons with their operation prohibited cannot be clicked.
• When "Operation Controlled" is displayed, there is no cooling and heating selection right.
2-1-4

Setting the temperature

Select the set temperature using "" button" and "" button. Check the set temperature at the display section.
a
Notes
• When the "" button or "" button is pressed, Celsius display increases and decreases in 0.5°C steps and Fahrenheit
display increases and decreases in 1°F steps.
• The heating set temperature range of 10°C to 15°C (48°F to 58°F) may not be settable, depending on the indoor unit
model.
• Here, the settable temperature range is different for each operation mode.
For the settable temperature ranges, see "Setting settable temperature range".
Temperature unit
Set temperature (Auto, Cool, Dry)
Set temperature (Heat)
Operation Setting
Operation Setting
Celsius (°C)
18°C-30°C
10°C-30°C
En-17
1
1
Fahrenheit (°F)
64°F - 88°F
48°F - 88°F