312
Mail Setting
●
When an error is generated at the touch panel controller or a registered outdoor unit or indoor unit, an E-
mail can be sent to a pre-registered address.
●
This unit does not have the server function. To use this function, SMTP server outside this unit or E-mail
receiving terminal must be connected by network (LAN).
3-2-1
Main screens of mail setting
3-2-2
Setting the mail information
Input the information of the E-mail to be sent.
●
Click "Edit" button on the "Mail Information Setting" field.
a
"Mail Information Setting" screen opens.
¡
Input the message ("Subject", "Site Name", and "Remote Connection URL") sent by E-mail.
b
When the setting is complete, click "OK" button.
c
Mail Setting
Mail Information Setting
En-28
Mail Information Setting
"Edit" button
Server Setting
"Logout" button
Address Setting
"Edit" button
"OK" button
"Transmission Test" button
"Cancel" button
1
2
3