Chapter 2 Control; Main Screens Of Control; Setting Operation On/Off - Fujitsu Airstage UTY-DTGYZ1 Manual

Chapter 2 CONTROL
211 Control
2-1-1

Main screens of Control

Operation Setting
Controlled group name display button
Set Temp. display
Control objective display
Mode button
"On/Off" button
"Cancel" button
Operation Controlled*
Set Temp. button
*1. Displays when operation mode is controlled by master unit.
2-1-2

Setting operation On/Off

Click "On" button.
a
Operation start setting of the selected (blue) indoor units is performed. When "Off" button is clicked, operation stop setting
●
is performed.
Click "OK" button.
b
The set contents are executed.
¡
Note
When "" button at "Control Unit" on "Operation Setting" screen is clicked, selected R.C.Group / Group is displayed. (When
two or more "R.C.Group" and "Group" are selected, the operation can be performed.)
1
Fan button
Operation Setting
En-16
Fan operation display
R.C. Prohibition button
Up/Down Swing setting display
Up/Down Swing setting button
"On/ Off" button
"On/ Off" button
"Reset" button
"Start" button
Special State screen
display move (up/down)
button
"OK" button
Special State display
Left/Right Swing setting button
Left/Right Swing setting display
1
2