Basic Specifications - Infinity MODULUS Service Manual

Modulus
MODULUS SUBWOOFER SPECIFICATIONS
Frequency Response:
Crossover Frequency:
High Pass:
Low Pass:
Output Power:
Driver:
Inputs (to ECU):
Outputs (from ECU):
Servo Control System
Dimensions:
MODULUS ECU SPECIFICATIONS
CONTROL PARAMETERS:
Crossover:
Phase: 0 degrees
Level:
Switch: 22 Hz
BOTH CHANNELS DRIVEN UNLESS OTHERWISE SPECIFIED
Max Vin:
Note: Higher input voltages can be achieved with lower "level" control (knob) levels
Max Vout:
Gain @ 70 Hz:
Input Sens.:
Zinput:
Zoutput:
S/N Ratio:
THD+N
20 Hz — 200 Hz:
200 — 800 Hz:
22 - 200 Hz
22Hz and 35 Hz, 12 dB per octave
50 - 200 Hz (Continuously Variable, 12dB per octave)
250 Watts (RMS)
12" IMG Woofer w/ accelerometer - (2 Ohm DCR)
Line Level (from Electronic Control Unit)
6 dB per octave passive filter for satellite amplifier
Motional feedback, accelerometer controlled
19 17 ½ X 17 12" (H x W x D)
(483 x 444 x 444mm)
Full CW
Full CW
5.0 volts (One channel)
8.0 volts (Both channels)
5.0 volts (One channel driven)
8.0 volts (Both channels driven)
0 dB (none)
500µV — 8.0 volts
70KW
260W
—124 dB
less than .002%
less than .01%
2