Related Manuals for DAPAudio Odin S-18 Line Array Sub V1
Summary of Contents for DAPAudio Odin S-18 Line Array Sub V1
- Page 1 USER MANUAL ENGLISH Odin S-18 Line Array Sub Product code: D3971 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Odin S-18 Line Array Sub Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................5 Warnings and Safety Instructions ........................ - Page 3 Odin S-18 Line Array Sub Preface Thank you for purchasing this DAP product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 4: Introduction
Odin S-18 Line Array Sub Introduction Before Using the Product Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. -
Page 5: Symbols And Signal Words
Odin S-18 Line Array Sub Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Safety
Odin S-18 Line Array Sub Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children... -
Page 7: Requirements For The User
Odin S-18 Line Array Sub Attention This device shall be used only for the purposes it is designed for. This device is designed to be used as a passive line array subwoofer. It is suitable only for indoor use. Any incorrect use may lead to hazardous situations and result in injuries and material damage. -
Page 8: Description Of The Device
Odin S-18 Line Array Sub Description of the Device The DAP Odin S-18 is a passive line array subwoofer. You can combine this device with the DAP Odin T-8 or T-8A satellite loudspeakers, with the DAP Odin FB-02 Flybar (as an adapter) and the DAP Odin FB-01 Flybar. -
Page 9: Product Specifications
Odin S-18 Line Array Sub Product Specifications Model: DAP Odin S-18 Line Array Sub Physical: Dimensions: 700 x 663 x 665 mm (L x W x H) Weight: 56,9 kg Inputs: RMS input power: 1200 W Peak input power: 2400 W Audio Specifications: Speaker system: Subwoofer... -
Page 10: Dimensions
Odin S-18 Line Array Sub Dimensions Fig. 04 Product code: D3971... -
Page 11: Installation
Odin S-18 Line Array Sub Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. Installation must be carried out only by instructed persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. ●... -
Page 12: Stacking Multiple Devices
Odin S-18 Line Array Sub Stacking Multiple Devices You can stack multiple Odin S-18 Line Array Sub devices in one setup. To stack multiple devices, follow the steps below: Put one device on another device. Push and hold down the buttons of the 4 x spring-loaded pins (01). Remove the 4 x spring-loaded pins (01). -
Page 13: Mounting Options
Odin S-18 Line Array Sub Mounting Options CAUTION Restrict the access under the work area during installation and/or deinstallation. You can mount an array of devices in the following ways: ● on a level stable surface ● with a distance pole ●... -
Page 14: Installation With A Distance Pole
Odin S-18 Line Array Sub Installation with a Distance Pole You can create a setup of the Odin satellite speakers installed on top of the device, with an M20 distance pole (D8611). See 3.4. Optional Accessories on page 8. To install the devices with an M20 distance pole, follow the steps below: Connect multiple Odin satellite speakers to each other. -
Page 15: Installation With The Odin Fb-01 Flybar
Odin S-18 Line Array Sub Installation with the Odin FB-01 Flybar WARNING Do not hang more devices on one fly bar than the maximum allowed number. To connect the device to the Odin FB-01 Flybar, follow the steps below: Push and hold down the buttons of the 4 x spring-loaded pins (01). Remove the 4 x spring-loaded pins (01). -
Page 16: Installation With The Odin Fb-02 Flybar
Odin S-18 Line Array Sub Installation with the Odin FB-02 Flybar WARNING Do not hang more devices on one fly bar than the maximum allowed number. To connect the device to the Odin FB-02 Flybar, follow the steps below: Push and hold down the buttons of the 4 x spring-loaded pins (01). Remove the 4 x spring-loaded pins (01). -
Page 17: Setup And Operation
Odin S-18 Line Array Sub Setup and Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is designed to be used as a passive line array subwoofer. It is suitable only for indoor use. Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. - Page 18 Odin S-18 Line Array Sub To connect the device to a conventional amplifier and connect multiple speakers to each other: Connect the speaker connector IN (05) of the first device to the output of the amplifier. Connect the speaker connector THRU (06) of the first device to the speaker connector IN (05) of the second device.
-
Page 19: Troubleshooting
Odin S-18 Line Array Sub Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 20: Corrective Maintenance
Odin S-18 Line Array Sub Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. - Page 21 Odin S-18 Line Array Sub Product code: D3971...
- Page 22 Odin S-18 Line Array Sub Product code: D3971...
- Page 23 Odin S-18 Line Array Sub Product code: D3971...
- Page 24 ©2023 DAP...