Page 1
MANUAL ENGLISH Pure-18S Passive 18” Subwoofer Order code: D3744 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
Back ....................................6 Installation ................................... 7 Setup and Operation ................................ 8 Connection Example 1 (2 x Pure-10/Pure-12/Pure-15 and 2 x Pure-15S/Pure-18S) .......... 8 Connection Example 2 (2 x Pure-10/Pure-12/Pure-15 and 4 x Pure-15S/Pure-18S) .......... 9 Connection Cables .................................10 Maintenance ..................................10 Troubleshooting ................................10...
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● DAP Audio Pure-18S Passive 18” Subwoofer ● User manual Safety Instructions Every person involved with the installation, operation and maintenance of this system has to: ●...
Page 4
Only use device indoors, avoid contact with water or other liquids. ● Prevent distortion! Make sure that all components connected to the Pure-18S have sufficient power ratings. Otherwise distortion will be generated because the components are operated at their limits.
Pure-18S Passive 18” Subwoofer Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way than the one described in this manual, the product may suffer damages and the warranty becomes void.
Description of the device Features The DAP Audio Pure-18S is a passive 18" subwoofer which perfectly complements the 10", 12" and 15" units. You have the possibility to set up the sound that matches the requirements of your venue. If you are looking for a way to add Pure bass to your venue, then the Pure-18S is your answer.
Pure-18S Passive 18” Subwoofer Overview Fig. 01 Back Fig. 02 01) Speakon NL4 MID-HIGH OUT 02) Speakon NL4 IN 03) Speakon NL4 OUT 04) Phase switch Move the switch to select NORMAL or INVERTED. 05) Low-pass filter switch ON/OFF Move the switch to turn the low-pass filter on/off.
Pure-18S Passive 18” Subwoofer Installation Remove all packing materials from the Pure-18S. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
02) Make sure that the low-pass filter (05) is set to ON and phase invert (04) is set to the same direction for all subwoofer cabinets! 03) Connect your mixer to the amplifier. 04) Connect power supply to the mixer and the amplifier. Connection Example 1 (2 x Pure-10/Pure-12/Pure-15 and 2 x Pure-15S/Pure-18S) Fig. 04 Order code: D3744...
03) If all appears to be O.K., plug the unit in again. 04) If you are unable to determine the cause of the problem, do not open the Pure-18S, as this may damage the unit and the warranty will become void.
Need help?
Do you have a question about the Pure-18S and is the answer not in the manual?
Questions and answers